+86-13819126663
الرطوبة مزيل الرطوبة video

الرطوبة مزيل الرطوبة

138L مزيل الرطوبة

الوصف

moisture absorber dehumidifiermoisture absorber dehumidifier

نموذج DH-5138C
إزالة الرطوبة 138L / D
مصدر الطاقة 220V / 50HZ
تقييمه مدخلات الطاقة 1800W
تصنيف الطاقة الحالية 7.8A
درجة حرارة العمل 5-38 ℃
تعميم الهواء 1000M3 / ساعة
مبرد R22
الوزن الصافي 54Kg
الوزن الإجمالي 58KG
تطبيق الفضاء 120 ~ 160m2
وحدة البعد (مم) 408x480x1030
حجم التعبئة (مم) 550x455x1135
تحميل الكمية 72PCS / 20FT
مصطلح الدفع T / T
مرحلة الانتاج 5 ايام
تاريخ صالح 30 يوما

صور المنتج:

moisture absorber dehumidifier

moisture absorber dehumidifier

Do you need to close the window when dehumidifying the household dehumidifier? When dehumidification is required to close the window, we know that the principle of dehumidification is that when the refrigerant in the evaporator evaporates, a large amount of heat is absorbed, reducing the surface temperature of the evaporator, and liquefying the water vapor in the indoor air into water. This condensate will flow through the outlet pipe to the water pan and out of the room. At this point, you need to close the window, otherwise the outdoor humidity will enter again. It will lead to the danger of incomplete dehumidification, so it is best to close the window.  Dehumidifier dehumidification and power saving? First, the lower the temperature setting during dehumidification, the better the dehumidification effect is proportional to the power consumption. When the dehumidification function is set, it is necessary to continuously reverse the reversing valve of the compressor system to cool it for a while, and the heating is maintained for a while to keep the room temperature constant. The baby compressor will run continuously without charging.  Second, in the dehumidification mode, compared with the cooling mode, save power, because the compressor operation in the dehumidification mode is intermittent, when the ambient temperature is higher than the ambient temperature, the set temperature is mostly lower than 27C for general When the cooling is at 35C, the compressor hardly stops. Intermittent operation saves more power when the compressor is turned on and off in dehumidification mode, but it must be remembered that the dehumidification function does not replace the cooling function.  Dehumidifier dehumidification is easy to use? When operating in dehumidification mode, the indoor fan is always running at low speed, the compressor is turned on and off, and the refrigeration system is used for intermittent refrigeration cycle. The resulting cooling capacity is primarily used to balance the latent heat of the indoor air. The water vapor turns into condensed water. A small portion is used to balance sensible heat, which is to lower some room temperature. When the compressor is stopped, the room temperature will gradually rise slowly. When it rises to about 1C above the set temperature, the compressor will automatically start, allowing it to circulate continuously, keeping the room temperature close to the set value, while removing a large amount of moisture from the air.  We know that in the spring, the dehumidification mode can be used. The dehumidification function is a very practical function. Save money not only without the need to purchase a dehumidifier. And the dehumidification speed is also relatively fast. It can help people effectively adjust the humidity in the air. Especially for residents on the first floor, if the weather is moderately large, you can try to purchase the dehumidification function. After dehumidification, it can reduce the feeling of dampness before dehumidification, and can eliminate the uncomfortable damp feeling.

هل تحتاج إلى إغلاق النافذة عند إزالة الرطوبة من الغرفة؟

عندما يتطلب الأمر إزالة الرطوبة لإغلاق النافذة ، نعلم أن مبدأ إزالة الرطوبة هو أنه عندما يتبخر المبرد في المبخر ، يتم امتصاص كمية كبيرة من الحرارة ، مما يقلل من درجة حرارة سطح المبخر ، ويسيل بخار الماء في الأماكن المغلقة. الهواء في الماء. سوف يتدفق هذا المكثف عبر أنبوب المخرج إلى وعاء الماء ويخرج من الغرفة. في هذه المرحلة ، تحتاج إلى إغلاق النافذة ، وإلا ستدخل الرطوبة الخارجية مرة أخرى. سيؤدي ذلك إلى خطر إزالة الرطوبة غير المكتملة ، لذلك من الأفضل إغلاق النافذة.


أولاً ، كلما انخفض ضبط درجة الحرارة أثناء إزالة الرطوبة ، كلما كان تأثير إزالة الرطوبة أفضلًا مع استهلاك الطاقة. عند ضبط وظيفة إزالة الرطوبة ، من الضروري عكس اتجاه الصمام العكسي لنظام الضاغط باستمرار لتبريده لفترة من الوقت ، والحفاظ على التدفئة لفترة من الوقت للحفاظ على درجة حرارة الغرفة ثابتة. سوف يعمل ضاغط الطفل بشكل مستمر دون شحن.


ثانياً ، في وضع إزالة الرطوبة ، بالمقارنة مع وضع التبريد ، يمكنك توفير الطاقة ، لأن عملية الضاغط في وضع إزالة الرطوبة تكون متقطعة ، عندما تكون درجة الحرارة المحيطة أعلى من درجة الحرارة المحيطة ، تكون درجة الحرارة المحددة أقل من 27 درجة مئوية بشكل عام. التبريد في 35C ، ضاغط بالكاد يتوقف. تعمل العملية المتقطعة على توفير المزيد من الطاقة عند تشغيل الضاغط وإيقاف تشغيله في وضع إزالة الرطوبة ، ولكن يجب أن نتذكر أن وظيفة إزالة الرطوبة لا تحل محل وظيفة التبريد.


عند التشغيل في وضع إزالة الرطوبة ، تعمل المروحة الداخلية دائمًا بسرعة منخفضة ، ويتم تشغيل الضاغط وإيقاف تشغيله ، ويستخدم نظام التبريد في دورة التبريد المتقطعة. تستخدم قدرة التبريد الناتجة بشكل أساسي لموازنة الحرارة الكامنة للهواء الداخلي. يتحول بخار الماء إلى ماء مكثف. يستخدم جزء صغير لموازنة الحرارة المعقولة ، وهو خفض درجة حرارة الغرفة. عند إيقاف الضاغط ، سترتفع درجة حرارة الغرفة تدريجياً ببطء. عندما يرتفع إلى حوالي 1 درجة مئوية فوق درجة الحرارة المحددة ، سيبدأ الضاغط تلقائيًا ، مما يتيح له الدوران بشكل مستمر ، مع إبقاء درجة حرارة الغرفة قريبة من القيمة المحددة ، مع إزالة كمية كبيرة من الرطوبة من الهواء.


نحن نعلم أنه في فصل الربيع ، يمكن استخدام وضع إزالة الرطوبة. وظيفة إزالة الرطوبة هي وظيفة عملية للغاية. توفير المال ليس فقط دون الحاجة لشراء مزيل الرطوبة. وسرعة إزالة الرطوبة هي أيضا سريعة نسبيا. يمكن أن تساعد الناس على ضبط الرطوبة في الهواء بشكل فعال. خاصة للمقيمين في الطابق الأول ، إذا كان الطقس كبيرًا إلى حد ما ، فيمكنك محاولة شراء وظيفة إزالة الرطوبة. بعد إزالة الرطوبة ، يمكن أن يقلل الشعور بالرطوبة قبل إزالة الرطوبة ، ويمكن أن يقلل الشعور الرطب غير المريح.


لمزيد من التفاصيل ، يرجى الاتصال بمدير تطوير المشاريع لدينا على النحو التالي:

Do you need to close the window when dehumidifying the household dehumidifier? When dehumidification is required to close the window, we know that the principle of dehumidification is that when the refrigerant in the evaporator evaporates, a large amount of heat is absorbed, reducing the surface temperature of the evaporator, and liquefying the water vapor in the indoor air into water. This condensate will flow through the outlet pipe to the water pan and out of the room. At this point, you need to close the window, otherwise the outdoor humidity will enter again. It will lead to the danger of incomplete dehumidification, so it is best to close the window.  Dehumidifier dehumidification and power saving? First, the lower the temperature setting during dehumidification, the better the dehumidification effect is proportional to the power consumption. When the dehumidification function is set, it is necessary to continuously reverse the reversing valve of the compressor system to cool it for a while, and the heating is maintained for a while to keep the room temperature constant. The baby compressor will run continuously without charging.  Second, in the dehumidification mode, compared with the cooling mode, save power, because the compressor operation in the dehumidification mode is intermittent, when the ambient temperature is higher than the ambient temperature, the set temperature is mostly lower than 27C for general When the cooling is at 35C, the compressor hardly stops. Intermittent operation saves more power when the compressor is turned on and off in dehumidification mode, but it must be remembered that the dehumidification function does not replace the cooling function.  Dehumidifier dehumidification is easy to use? When operating in dehumidification mode, the indoor fan is always running at low speed, the compressor is turned on and off, and the refrigeration system is used for intermittent refrigeration cycle. The resulting cooling capacity is primarily used to balance the latent heat of the indoor air. The water vapor turns into condensed water. A small portion is used to balance sensible heat, which is to lower some room temperature. When the compressor is stopped, the room temperature will gradually rise slowly. When it rises to about 1C above the set temperature, the compressor will automatically start, allowing it to circulate continuously, keeping the room temperature close to the set value, while removing a large amount of moisture from the air.  We know that in the spring, the dehumidification mode can be used. The dehumidification function is a very practical function. Save money not only without the need to purchase a dehumidifier. And the dehumidification speed is also relatively fast. It can help people effectively adjust the humidity in the air. Especially for residents on the first floor, if the weather is moderately large, you can try to purchase the dehumidification function. After dehumidification, it can reduce the feeling of dampness before dehumidification, and can eliminate the uncomfortable damp feeling.

الوسم : امتصاص الرطوبة مزيل الرطوبةالصين ، المصنعين ، الموردين ، مصنع ، الجملة

إرسال التحقيق

(0/10)

clearall